|
@
Instruction
Scope
The
International Journal of the JCRM accepts high
level original papers related to rock mechanics / rock
engineering written in English.
@
Eligibility of contributing authors
The first
author should be a member of International Society for Rock
Mechanics (ISRM) or a student member of Japanese Committee
for Rock Mechanics (JCRM). The maximum number of authors is 6.
@
Category
of manuscripts
The submitted manuscript should be
classified into one of the following categories;
@
[Review Paper]
A
summary/commentary from a universal point of view, or the
author's interpretations/opinions, on the
academic/technological transition and state of a specific
issue related to rock mechanics, rock engineering, and their
related fields.
[Issue Paper]
A monograph that
describes and discusses the theoretical/experimental outcome
including the original new knowledge related to rock
mechanics, rock engineering, and their related fields.
[Technical Note]
A note that
describes the results obtained from the laboratory/field
test, exploration, design, construction, field measurement,
etc. including the useful and valuable knowledge related to
rock mechanics, rock engineering, and their related fields.
[Discussion]
A discussion on
the Review Paper/Issue Paper/Technical Note of the IJJCRM
published within the recent 6 months, and the authors'
reply.
@
The
Manuscripts must not exceed the maximum number of pages for each category
listed below.
@
|
Category |
Maximum Number of Pages |
|
Review Paper
|
10 |
|
Issue Paper |
10 |
|
Technical Note
|
6 |
|
Discussion |
2 |
@
Submission of manuscripts
If the category of the submitted
manuscript is "Issue paper", the content should be
unpublished previously in any language. The manuscript
should be proof-read by a native speaker. Authors who wish
to publish their articles in the Journal should send the
2 kinds
of
electronic files listed below to Committee on E-Journal, JCRM
ijjcrm@rocknet-japan.org by email.
@
|
Required Document |
File Type |
File Name |
Example |
|
Submission & Copyright Transfer Form
|
MS Word |
Surname-s.doc* |
Smith-s.doc** |
|
Manuscript of the Article
|
Adobe PDF |
Surname-m.pdf* |
Smith-m.pdf** |
|
*
"Surname" in the file name is the
surname of the first author (no spaces).
** Example shows the case where "Surname"
is "Smith". |
MS Word type
template files for Submission & Copyright Transfer Form
and Templates for Manuscript are available. Those files
can be downloaded from this page (see below). The MS
Word file for the Manuscript of the Article must be
converted into the PDF file before sending it by email.
Please remind that the contributor has to send the MS
Word file after the acceptance of the article. The total
size of the attached files must not exceed 2MB
when submitting them. Whole the process through
manuscript submission, review & revision, acceptance,
and final submission of the article, is conducted via
only Internet using email. Therefore the contributor
must have a reliable email address for contact.
Outline
of manuscript format
(1)
General
comments
The author
should prepare the manuscript in A4 size (297~210mm) sheets
based on our prescribed format (Template for Manuscript).
The format of each paragraph is regulated by a specific
style tag in the template. Authors can get more detailed instruction from the
Template for Manuscript.
(2)
Title,
authors and abstract
The title, subtitle (if necessary), author(s),
and affiliation(s)
should be stated in this order, followed by an abstract of
200-300 words and 5-10 keywords.
(3)
Units
SI unit systems are to be used in all texts, tables and
figures.
(4) Symbols
and formulae
Italics should be used for all variables in
the main body of the text and equations, except for gsinh, gcosh,
ggradh, gtrh and so on.
(5) Tables
and figures
All tables and figures including photographs
should be pasted in the text, preferably on the same page as
they are cited. They should include captions of
approximately 20 words.
(6) References
In the text, place
the authorsf last names (without initials) and the date of
publication in parentheses. At the end of the paper, list
all references in alphabetical order. If several works by
the same author are cited, entries should be chronological.
Full reference should clearly be written in English (even if
it is a domestic journal) as shown in the following; Last
name, First name or Initials, year. Title of article, Title
of Journal (series number if necessary), volume number, (issue
number if necessary), page numbers.
@
Copyright
Copyright of
the accepted manuscript is reserved by
JCRM.
@
Reprints
Reprints may be ordered at an extra charge. Please
contact to Committee on E-Journal, JCRM for detail.
@
Contact
If you have any question about this journal, please contact
Committee on E-journal, JCRM via email.
Also, Manuscript of the Article and Submission & Copyright
Transfer Form are to be sent to Committee on E-journal, JCRM
via email. However, after the acceptance of the article, the
printed copy of Manuscript of the Article and the printed
Submission & Copyright Transfer Form with the author's
signature must be sent by postal
mail to the following address in addition to the electronic
submission.
@
|
Committee on
E-Journal,
Japanese
Committee for Rock Mechanics
C/O The Japanese Geotechnical Society
4-38-2, Sengoku, Bunkyo-ku, Tokyo 112-0011, Japan
phone: +81-3-3946-8677, fax: +81-3-3946-8678
email:
ijjcrm@rocknet-japan.org
|
@
Download
The contributors
can download the templates for contribution files here.
@
|
Document |
File Type |
File Name |
File
Size |
@ |
|
Submission & Copyright Transfer Form
|
MS Word |
Surname-s.doc |
41KB |
download |
|
Manuscript of the Article |
MS Word |
Surname-m.doc |
145KB |
download |
In the case of
Microsoft Windows, right-click on "download" and select
"Save Target As".
|